Nuoenx Backup Camera for RV, Split Screen 5 Inch HD Monitor W/Wireless License Plate Backup Camera & Wireless Rear View Camera, IR Night Vision Waterproof For Trailer, 5th Wheel

Waited a while after installed to do this review. Picture quality is great, installation is simple decided to hard wire monitor using an add a fuse set up, all wires are hidden. The mount didn’t really work where I wanted to mount monitor so used a bean bag type holder that works great. I installed 2nd camera to middle clearance light on camper and turn on the clearance lights to operate, so far so good. I am very pleased so far and searched a lot before purchasing this unit. I wanted to use a cigar port and liked this set up, however decided to hard wire instead. I think you will be well pleased with this unit.

This product worked great for me. It's not true wireless but it cuts down on running a wire from front to back. Hooking it up isn't hard as long as you can find a 12V power source preferably the reverse light so it only turns on when in reverse. I posted a picture of the best wire connectors to use. The suction mount didn't work at all for me at first and I was super disappointed but after soaking it in really hot water for about 5 minutes it works fine. Customer service it great and got back in touch the same day. I would recommend this to anyone and would buy again.

Works okay, signal is mostly good on 29' camper. Installation design has a few complications. But overall I like it.

I bought this for my Ford F-150 and my 29' camper. The signal for the truck is fine. The camper camera can be a bit laggy, but good enough for backing the trailer into a camp site. I also like using the camper camera while traveling on the highway, but at times the picture will freeze or go black.

The installation instructions were good, but there were a few design flaws. As other reviewers have said, the wire comes out the back of the camera, so in the USA we need to drill through our license plate. This means the wire will rub against sharp metal.

For the camper camera, you could certainly just drill holes for the camera mount if you want to put more holes in your camper. I made a bracket that let me attach it with one of the running lights, which also allowed a short run to power the camera. (Pics included.) I used a good bit of sealant around this bracket, but after one trip, it's still on tight, and the camera doesn't seem to bounce around very much.

My mechanic knocked the display screen off of the windshield where I had the suction cup mounted, and the screen broke. That wasn't a manufacturing issue, but now I need to get a replacement screen or replace the whole kit. But just a warning, be careful with the screen, it is delicate.

So, it's a good system for the price. Having it wireless made it easier to install than running wires all along the camper. The signal strength could be a bit stronger on the camper camera, and the mounting design could use some work. But once it is installed I really liked it.

What a great setup, exactly what I was looking for. The license plate camera works great as a hitch cam and I mounted the other camera up high on the back of my travel trailer connecting to the running lights so it's on all the time while traveling. Makes a great backup camera and also a rear view camera. The picture quality is good. I tried to find a 7" version of this but couldn't. I would like a larger screen but the 5" is sufficient.

Was incredibly easy to get hooked up and installed. Seems to work well!

My family being avid campers and trailer pullers this was an essential buy. It helps so much in hooking up the trailers ( Needing to see how close you are to your trailer & If you're lined up properly) And makes backing into camp Sites a breeze. It was not too difficult To set up and install. No was it hard to add-on an additional camera.

So far I have not installed the license plate camera but the main camera is nice. There is a slight delay but it really isn't a problem.

Where to start? Picture is fine but wish I would have gotten the bigger screen. Install, #1, license plate camera, wire gets pinched between camera frame and license so you have to drill hole through plate for camera wire to stop wire from getting pinched. #2, trailer camera, my trailer came with furrion camera mount, well to us this go spend another $20 dollars at Amazon for the adapter stuff to us it or take the furrion and start drilling holes to mount the to small of bracket provided with camera (see picture). #3, antenna is to long for camera mount and won't sit out straight on vertical surface (picture). #4, VERY IMPORTANT, with the monitor plugged it wipes out my key fobs to my truck, I can't lock or unlock my truck doors, ( 2001,GMC ) this is because of the wi-fi signal the monitor is looking for. It washes out the security module signal so I have to power off monitor.