Youmei Car Backup Camera Realtime Video WiFi Transmitter for iPhone iPad Andriod Phone and Pad

1. The Andriod device shall support Android 4.3 or above,and iOS device shall support version 10.3 or above.
2. No internet traffic is consumed from your phone/pad to wifi transmitter as using an Ad-Hoc wifi connection.

Specifications
– Transmitting frequency: 2400MHz-2483.5MHz
– Distance: more than 100M with no obstacle
– Frame rate: 30fps
– Video resolution: VGA
– Video compression:H.264
– Wireless protocols:IEEE 802.11b, 802.11g, 802.11n
– Power supply: DC 9-30V
– Consumption current: 150mA(Max)
– Encryption mode: WPA2
– Rainproof:Yes

Instructions
1. Install the wifi transmitter, then connect the backup camera cables to it, power on both of them.

2. Search “WIFIAV” (by kezhen zeng) software from your APP store and install it.

3. Turn on the WLAN on your phone/pad, search and connect to the WIFI named “WIFI AVIN” with default password for the first time.

4. Open the APP to view your car backup camera realtime video

Troubleshooting steps:
1.Check the LED is on or not, then assure the connection between this item and your camera.

2.When the background is black or the image is still, exit the APP first, and check whether the wifi connection is normal. Then click again the APP icon to enter into the software interface.

3. User could press the Reset button of the transmitter to reset the default factory SSID and password.

Package Content
1 x WIFI Transmitter
1 x English User Manual
1 x Antenna
1 x 5ft Power Cable
2 x 3M Sticker
1 x BNC to AV Connector

Product Features

  • Convert wired rearview monitoring system into wireless one
  • Monitor the rearview from APP support iOS and Andriod device. If you are using a Samsung mobile phone (including S7, S8, etc.), press the Reset button 4 times to switch to Samsung mode (SSID:WIFIAV-SAMSUNG), then connect your Samsung phone to the WIFI named “WIFIAV-SAMSUNG”, other operations are same as the Android system.
  • Compatible all regular AV connector camera. Transmitter rainproof, dustproof and shockproof
  • 30 days money back guarantee, 12 months warranty, lifetime friendly customer service
  • If you are looking for WiFi camera for your Truck/RV/Camper/Trailer recommend our promotional product “Fumei WiFi Backup Camera Truck RV Camper Trailer Wireless Waterproof Wide Angle Rear View Camera for iPhone iPad Android Phone Tablet”. This solution provides backup camera, wifi transmitter and smart APP all in one, the URL is https://www.amazon.com/dp/B07RWWQB76

For More Information – Click Here


Tagged , , , , , , , , , , . Bookmark the permalink.

3 Responses to Youmei Car Backup Camera Realtime Video WiFi Transmitter for iPhone iPad Andriod Phone and Pad

  1. Anonymous says:

    Great for installing backup camera on enclosed trailer This transmitter works perfectly and allowed me to get a nice clear backup image with no alterations to my tow vehicles. I purchased this from Amazon a few days ago and it arrived in 2 days. I needed a backup camera that would work on a 15 foot enclosed RESPO utility trailer that I tow behind different vehicles. This required modifications on the trailer and no modifications on any of my tow vehicles. I also wanted to use my cell phone as the display. I had previously…

  2. Anonymous says:

    Model 903W Youmei Video WIFI I just installed the Wifi transmitter and CCD backup camera on a 2012 Jeep Wrangler Sport and it works great! I followed the advice of others and wired the transmitter to a switchable power source so it’s on whenever the key is and the camera is wired to the back-up lights. I placed the transmitter at the back of the cab to make the coax cable hook-up as short as possible to reduce the chance of interference. The receiver is an iPad mini 4 running iOS 10.3.3. The WIFIAV software works great…

  3. Anonymous says:

    Works! – Transmitter transmitts fine and Software works with my LG Tablet – Android 5.1 Application: Backup and rear view cameraInstall: 2000 Chevrolet Express Camper Conversion Van rear door. License Plate light as power source was tapped using 3M wire tap clips (blue). I had issues with the 3M wire tap clips before but I did not want cut the wires to the license plate light to reduce the maintenance on the connections and possible removal of the wifi transmitter in the future. The power wires on the wifi transmitter are very small (20 AWG – maybe smaller) so the tap…