UNIKEL Lidar Range Finder Sensor Module Single-Point TFmini Micro Ranging Module Lidar Detectors with Cable for Arduino Raspberry Pi Pixhawk

Description:
Operating Range : 0.3-12m
Maximum operating range at 10% reflectivity : 5m
Applicable voltage range : 4.5-6V
Average power consumption : 0.12W
Acceptance angle : 2.3°
Communication interface : UART
Electromagnetic Compatibility(EMC):EN 55032 Class B
Baud rate:115200
Data bit:8
Stop bit:1
Parity bit:0
Minimum resolution ratio : 5mm
Frequency : 100Hz
Wavelength:850nm
Operating temperature : 20-60C
Light sensitivity : 70,000lux
Accuracy : 1% (less than 6m), 2% (6m-12m)
Size : 42mm * 15mm * 16mm
Weight : 6.1g
Main applications: Drone altitude holding and terrain following Machine control and safety sensor Robot distance detection
Certification: CE,FCC,ROHS

Product Features

  • Light weight about 6 grams, compact with small size 42mm * 15mm * 16mm
  • Operating Range is 0.3-12m. The average current is 120mA, instantaneous current can up to 800mA. When detecting beyond the limits of its range, it can adjust itself.
  • Please Note, if you use this work with a Pixhawk, you need buy a ttl-usb adapter board, convert the radar communication.
  • If you need any more information, please contact feel free.
  • Packing list: 1 X Lidar Range Finder Module, 1 X Cable. Warranty: Life-limited warranty and friendly customer service. Any question please feel free to contact.

Get More Detailed Information About This Product…


Tagged , , , , , , , , , , , , , , . Bookmark the permalink.

Comments are closed.