Uniden (BC15) Bearcat 15-Watt External Communications Speaker. Durable Rugged Design, Perfect for Amplifying Uniden Scanners, CB Radios, and Other Communications Receivers

This 3.5-Inch speaker may be small but with its 500hz-5kHz it brings more balance to your already rock’n Uniden speakers. With its Scanner and CB capability you will be able to hear/communicate with ease. The noise blanker will help reduce any electrical noise that usually happens with incoming calls.

Product Features

  • Stereo Plug for Scanner
  • CB Compatibility
  • Elbow 3.5mm Stereo
  • 15 Watts

Get More Detailed Information About This Product…


Tagged , , , , , , , , , , , , , , . Bookmark the permalink.

3 Responses to Uniden (BC15) Bearcat 15-Watt External Communications Speaker. Durable Rugged Design, Perfect for Amplifying Uniden Scanners, CB Radios, and Other Communications Receivers

  1. Anonymous says:

    Decent speaker with some design flaws; NOT amplified This is a properly designed speaker for good frequency response and clarity with voice comms. The listing says amplified, i.e. needing a separate power source, which it is NOT (model BC15). It is completely driven by the radio it is plugged in to.Two design flaws:1) There is no strain relief on the speaker wire as it exits the cabinet. At 15 months of exlusive use in doors as a component of my ham shack, I’ve already had to de-solder the speaker wires from the PCB so I…

  2. Anonymous says:

    Very good Audio. Worth the $

  3. Anonymous says:

    It does the job it is intended to do…no more, no less. In order to record the transmissions from my SDS100 scanner directly to my computer, I must use the scanner’s 3.5mm phone jack. However, by using the phone jack, I can no longer hear the transmissions through the scanner’s internal speaker. Therefore, I needed an inexpensive external speaker.Uniden offers three choices of non-amplified speakers and the BC15 is the middle model. It’s a 15-watt speaker which isn’t particularly powerful but does the job for which it was designed. I use…