BeneGlow® Dual-core Rear LCD Display Car Vehicle Reverse Backup Radar System with Parking Sensors (4 Sensors, White)

How does the 4-sensor system work:
• While reversing, all 4 rear sensors and LCD monitor will be active.

Tech Spec:
• Detection Angle: H>80°, V>90°
• Rate Voltage: 12V
• Operating Voltage Range: 9~16V
• Rate Current: 20~200mAh
• Rear Sensor Detection Range: 0.98~7.54 ft

About Alarm Modes:
• Sound: the closer the obstacle, the more rapid the sound.
• Matrix Light Bar: heartbeat tips to remind obstacle distance.
• Digital: precise figures shown on LCD screen.

Installation Tools Required:
• Hole Saw (package included)
• Drill
• Needle Nose Pliers
• Thin Steel Wire
• Rasp
• Tape measures
• Marker Pen
• Screwdrivers
• Electrical Tape

Important Notice:
• For safety reasons, while braking, only sensors sense obstacles, the LCD monitor will be active.
• Better keep the sensors at the same level, but also can be adjusted appropriately according to different car models.
• In order to avoid detecting the ground, please keep the sensor and the ground has a distance of 19.6~23.6 in (21.6 in suggested).
• Ensure the sensors are perpendicular to the ground.
• Please always keep the arrow (back of each sensor) up while installing.
• The Control Box should be mounted on side of the car trunk.

Package Includes:
• 1 x Control Box
• 1 x LCD Monitor
• 1 x LCD Extension Cable (17.39 ft)
• 4 x Parking Sensors (cable: 8.2 ft)
• 1 x Power Cable (9.84 ft)
• 1 x Hole Saw
• 1 x User Manual
• 1 x Control Box Sticker

Product Features

  • Dual-core independent digital LCD display. With built-in microcomputer control, obstacle detection range can be accurate to centimeters.
  • Full-weather design, anti-wind, anti-sand, anti-fog, anti-frost, anti-ice, anti-snow, anti-rain sensor systems for enhanced coverage and detection.
  • 7-speed volume and 4 switchable sound modes: silent, buzzer, speaker, speaker + buzzer.
  • 3 alarm modes: sound, matrix light bar, digital. Delicate sensors, easy to install and operate. Anti-electromagnetic interference.
  • Flush mounted installation and multi-colour choices, it will make your beloved car more charming and attractive.

Get More Detailed Information About This Product…


Tagged , , , , , , , , , , , . Bookmark the permalink.

2 Responses to BeneGlow® Dual-core Rear LCD Display Car Vehicle Reverse Backup Radar System with Parking Sensors (4 Sensors, White)

  1. Craig says:

    Instructions could be better

  2. Amazon Customer says:

    Rear bumper is low for most of the new cars I bought 8 sensors for my vauxhall Zafira B(2008 Model) last week. Since the back bumper is low, the sensor fitted at the height of 17.9 Inch to 18.9 inch from the ground. I can’t fix it higher than this height. Since it is lesser than the recommended 21.6 Inch, it detects the ground and warning all the time while reversing. The front sensors are fine. It looks like these sensors are not suitable for the new cars(apart from very tall cards like range rovers??). Unbelievable, waste of…