BeneGlow® Dual-core Front and Rear LCD Display Car Vehicle Reverse Backup Radar System with Parking Sensors (8 Sensors, Dark Red)

How does the 8-sensor system work:
• While braking, all 4 front sensors will be active. While reversing, 2 front & 4 rear sensors and LCD monitor will be active.

Tech Spec:
• Detection Angle: H>80°, V>90°
• Rate Voltage: 12V
• Operating Voltage Range: 9~16V
• Front Sensor Detection Range: 0.98~3.28 ft
• Rear Sensor Detection Range: 0.98~7.54 ft

3 Alarm Modes:
• Sound: the closer the obstacle, the more rapid the sound.
• Matrix Light Bar: heartbeat tips to remind obstacle distance.
• Digital: precise figures shown on LCD screen.

Important Notice:
• For safety reasons, while braking, only the sensors sense obstacles, the LCD monitor will be active.
• Try to keep the sensors at the same level.
• In order to avoid detecting the ground, please keep the sensor and the ground has a distance of 19.6~23.6 in (21.6 in suggested).
• Please always keep the arrow (back of each sensor) up while installing.
• The Control Box should be mounted on side of the car trunk.

Installation Tools Required:
• Hole Saw (package included)
• Drill
• Needle Nose Pliers
• Thin Steel Wire
• Rasp
• Tape measures
• Marker Pen
• Screwdrivers
• Electrical Tape

Package Includes:
• 1 x Control Box
• 1 x LCD Monitor
• 1 x LCD Extension Cable (17.39 ft)
• 8 x Parking Sensors (cable: 8.2 ft)
• 4 x Front Sensor Extension Cable (14.76 ft)
• 1 x Power Cable (9.84 ft)
• 1 x Hole Saw
• 1 x User Manual
• 1 x Control Box Sticker

Product Features

  • Dual-core independent digital LCD display. With built-in microcomputer control, obstacle detection range can be accurate to centimeters.
  • Full-weather design, anti-wind, anti-sand, anti-fog, anti-frost, anti-ice, anti-snow, anti-rain sensor systems for enhanced coverage and detection.
  • 7-speed volume and 4 switchable sound modes: silent, buzzer, speaker, speaker + buzzer.
  • Three alarm modes: sound, matrix light bar & digital. Delicate sensors, easy to install and operate. Anti-electromagnetic interference.
  • Smart protection: while reversing, 2 front end sensors will be active to prevent angle rubbing.

Get More Detailed Information About This Product…

Tagged , , , , , , , , , , , , . Bookmark the permalink.

3 Responses to BeneGlow® Dual-core Front and Rear LCD Display Car Vehicle Reverse Backup Radar System with Parking Sensors (8 Sensors, Dark Red)

  1. Rachid El Idrissi says:

    Fantastic product. Reasonably priced. Very happy

  2. Sohail Hussain says:

    Great! I bought theses for my son who is newly passed and has a car. He found it hard reversing and judging the space behind him. So I bought these and they were so easy and simple I fixed them myself. They match the colour perfectly and the screen look great! The screen shows which side the obstacle is on and beeps or speaks to let you know the difference. Only had to connect 2 wires to the car which is power and earth. So I connected the power to the reverse lights wire so they come on when…

  3. Danny says:

    Poorly Made, but Work. These sensors are overall very average. They arrived in a box which had the contents of the box within and the name of the product. Inside of the box was all of the components; the 8 sensors, four for the front and four for the back. There was a display, which is shown in the image and another necessary component.The display was very cheaply made and the glossy material felt like it could have broken within a few minutes of receiving it. The cables to the sensors were visible which…