Autone 220V800W Microwave Radar Sensor PIR Occupancy Body Motion Detector Light Switch


Features:
This microwave motion sensor reflects the latest development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily.
Commonly used to control lighting and extract ventilation.
Power-saving by ensuring lights and fans are not left on.
They will save energy by ensuring lights and fans not to be left on.
The energy savings will be high with a short energy saving investment payback time if connected to average energy level lighting such as fluorescent tubes, or compact fluorescent lamps. Higher savings if controlling tungsten or halogen lighting.
The time of the light can last or adjust automatically when you enter and stay in the room and the light will go out according to the time of your your setting when you leave the room.
Pluggable type of the terminals which make easier and much convenient to install.
Applicable to monitoring equipment,warning facility, LED lamp, fluorescent lamp, incandescent lamp, ventilator and magnetic valve and so on.
Can be installed on wall, ceiling and anywhere of your house.
Indoor use only

Specifications:
Installation sit: ceiling mounting
power source: 220-240VAC
Max load:800W
Frequency: 50-60Hz
HF system:5.8 GHz CW radar,ISM band
Time setting: 10 seconds to 30minutes
Detection angle: 360 degree
Working temperature: -15 to +70 C
Ideal installation height: 2 – 4 meters
Detection distance:2-10M(radius)
Power consumption: 0.5 W
Light control: 2-2000LUX
Product size: 9.5×9.5x4cm/3.74×3.74×1.57inch
Package size: 10*4.6*10CM

Note:
Please allow 1-3mm differs due to manual measurement.
-Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.

Package Include:
1 x Microwave Motion Sensor Sw

Product Features

  • ✔ This microwave motion sensor reflects the latest development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily.
  • ✔ The time of the light can last or adjust automatically when you enter and stay in the room and the light will go out according to the time of your your setting when you leave the room.
  • ✔ Pluggable type of the terminals which make easier and much convenient to install.Can be installed on wall, ceiling and anywhere of your house.
  • ✔ Applicable to monitoring equipment,warning facility, LED lamp, fluorescent lamp, incandescent lamp, ventilator and magnetic valve and so on.
  • ✔ Specifications: Installation sit: ceiling mounting, power source: 220-240VAC, Max load:800W, Time setting: 10 seconds to 30minutes, Detection angle: 360 degree, Detection distance:2-10M(radius), Power consumption: 0.5 W, Light control: 2-2000LUX, Product size: 9.5×9.5x4cm/3.74×3.74×1.57inch, Package size: 10*4.6*10CM

Get More Detailed Information About This Product…


Tagged , , , , , , , , , , . Bookmark the permalink.

Comments are closed.