This WIRELESS REAR VIEW CAMERA KIT with monitor can automatically switch to the back view when reverse gear is engaged.Hidden obstacles such as posts and flower-beds can cause serious damage to cars and children may be in danger during reverse manoeuvres.It offers an ideal solution for drivers who care for their vehicle and the safety of their loved ones.
-Automatically switch on when reverse gear is engaged.
-Monitor can be 360 degree circumrotated.With buttons for menu operation.
-Anti-rusted Zinc Alloy Camera housing, camera can be adjusted up and down.
Technical specification of monitor
-Monitor can be 360 degree circumrotated
-2.4Ghz Built-in Wireless
-Supply voltage: 12V normal
-Current consumption: 300mA (Max.)
-TV System: PAL or NTSC system auto convert
-Video input: One video input
-Turn on mode: Automatic turn on when receiving video signal
Technical specification of camera
-Mini camera: diameter:18.5mm, length:22mm
-Supply voltage: DC12V normal
-Current consumption: 100mA (Max.)
-Image device: 1/4 inch color
-TV System: NTSC system
-Resolution: 420 TV lines
-Effective pixels: 720*480
-Minimum illumination: 0.5 LUX
-View angle: 170 degree (diagonal)
-S/N ratio: More than 48db (AGC-Off)
-Video output: RCA connector 1.0vp-p 75 ohm
-Others: Automatic white balance, AGC and BLC
-1 X 3.5″ TFT-LCD Monitor
-1 X Camera with attached in-line Transmitter
-1 X 12V Cigarette Lighter Power adapter
-1 X built-in wireless receiver
-2 X Red Scotchlock Connector
-4 X Cable Ties
NOTE:If you prefer parking grid function,just cutting off the green line of the camera.(parking grid function is not available in default setting)just choose by yourself!
- 2.4G Built-in Wireless – Easy and neat installation !
- Parking grid is selectable, if you need the parking line, just need to shear the green coil
- Monitor mounts to windshield or dash board, easy-to-see rear coverage
- Camera with water-proof lens, wide angle, high resolution, low illumination for night vision
- In most cases no need to drill holes for camera. Fit into the original holes of number plate